ENGINE
- 2 cylinder, horizontally opposed, side valve, 4 stroke, bore 6.625 in., stroke 6.250 in.
- 1,200 & 1,300 rpm.
- Displacement per cylinder: 215 cubic inch, compression ratio 4 to 1
- Magneto ignition.
HORSEPOWER
- 52.5 Max. belt, 44.6 Rated belt.
- 50.0 Max. drawbar, 37.5 Rated drawbar.
- 7,122 lb Max. drawbar pull at 2.375 mph.
FUEL
- Kerosene. Fuel tank capacity 23.0 imp.gallons.
- Gasoline tank capacity 3.5 imp.gallons.
- Carbruetter Equipment.
COOLING
- Thermo-syphon system controlled by radiator shutters operated from the drivers seat.
- Water temperature indicator ( gauge ) mounted on the instrument panel.
GOVERNOR
- Mechanical. Controlled by hand lever.
ELECTRICAL
- 12 Volt starting and lighting system.
- Twin filament head lamps.
TRANSMISSION
- A three speed and reverse sliding spur gearbox mounted on the rear of the engine, proving nine forward
gears and three reverse.
- Gears are forged from high grade alloy steel and case hardened.
DIFFERENTIAL
- Bevel gear type with hypoid crown wheel and pinion, running at four times rear wheel speed.
FINAL DRIVES
- Two large ( 18 inch diameter ) case-hardened bull gears meshing with pinions on
the differential shaft.
- Rear axles are 3.50 inches in diameter, high tensile steel.
STEERING BRAKES
- Individual steering brakes with separate pedals to assist steering
under exceptional circumstances.
- Rear axles are 3.50 inches in diameter, high tensile steel.
TYRE AND WHEEL EQUIPMENT
- Front - 7.50 x 18.0 on split cast wheels. ( Optional 8.25 x 20 )
- Rear - 15.0 x 30.0 on split cast wheels. ( Optional 18 x 26 )
STEERING
- Recirculating ball type steering gear.
- Connected to front wheels by adjustable draglink and track rods fitted with ball joints.
POWER TAKE-OFF
- Splined shaft is to the A.S.A.E. standard of 1.375 in. 6B.
- Shaft speed is 540 rpm. clockwise rotation (viewed from rear).
- Height above ground - 32.5 in. on 18.00 x 26.0 tyres.
- End of shaft 14.0 in. ahead of drawbar pin & and 2.0 in. to right of center.
BELT PULLEY (Optinal Extra Equipment)
- Pulley - 13.0 in. diameter x 7.0 in. wide.
- Pulley Speed - 810 rpm.
OVERALL DIMENSION
- Length 135.0 in., Width 68.0 in., Height 90.0 in.
- Wheelbase 83.0 in.
- Turning circle 12ft-8in.
OVERALL WEIGHT
- Standard (on 18.0 x 26.0 tyres) without water or weights - 9,120 lbs.
| SPECIFICATIONS AND GEAR CHART ( M.P.H. on Standard
Tyres ) |
| Eng.rpm |
1 Low |
2 Low |
3 Low |
1 Int |
2 Int |
3 Int |
1 High |
2 High |
3 High |
| 1,200 |
2.4 |
2.9 |
3.4 |
4.0 |
5.0 |
6.3 |
9.5 |
11.5 |
13.8 |
| 1,300 |
2.5 |
3.1 |
3.6 |
4.5 |
5.5 |
6.8 |
10.3 |
12.5 |
15.0 |
|
