ENGINE
- Ford 6 cylinder vertical in-line 2 diesel.
- Displacement 404.0 cubic inch, compression ration 16:1, rated speed 1,200-1,500 rpm.
HORSEPOWER
- 77.0 Max. belt, 65.4 Rated belt.
- 70.0 Max. drawbar, 52.5 Rated drawbar.
FUEL
- Diesel. Fuel tank capacity 18.0 imp.gallons.
- Filtration: strainer and water trap.
COOLING
- Water circulated through engine and radiator by centrifugal pump mounted on engine.
- Temperature controlled by thermostat.
GOVERNOR
- Mechanical. Controlled by hand lever.
ELECTRICAL
- 12 Volt starting and lighting system.
- Twin filament head lamps.
TRANSMISSION
- A three speed and reverse sliding spur gearbox mounted on the rear of the engine.
- Coupled by a universally jointed shaft to a high,
intermediate and low range gearbox mounted on the front of the differential.
- The two gearboxes are fitted with seperate change levers.
DIFFERENTIAL
- Bevel gear type with spiral bevel crown wheel and pinion.
- Pinion and differential shaft bearings are taper roller.
TYRE AND WHEEL EQUIPMENT
- Front - 7.50 x 18 on split cast wheels.
- Rear - 13.50 x 32 Dual on split cast wheels.
- Special rear, single 18 x 26, front, 8.25 x 20
STEERING
- Recirculating ball type steering gear.
- Connected to front wheels by adjustable draglink and track rods fitted with ball joints.
POWER TAKE-OFF
- Splined shaft is to the A.S.A.E. standard of 1.375 in. 6B
- Shaft speed is 540 rpm. clockwise rotation (viewed from rear).
- Height above ground - 33.25 in. on 13.50 x 32.0 tyres.
OVERALL DIMENSION
- Length 135.0 in., Width 68.0 in., Height 90.0 in.
- Wheelbase 83.0 in.
- Turning circle 12ft-8inch.
| SPECIFICATIONS AND GEAR CHART ( M.P.H. on Standard
Tyres ) |
| Eng.rpm |
1 Low |
2 Low |
3 Low |
1 Int |
2 Int |
3 Int |
1 High |
2 High |
3 High |
| 1,200 |
2.5 |
3.1 |
3.8 |
4.4 |
5.3 |
6.4 |
10.3 |
12.5 |
15.0 |
| 1,500 |
3.125 |
4.0 |
4.8 |
5.4 |
6.5 |
7.8 |
12.8 |
15.6 |
18.8 |
|
